How to Troubleshoot Error Code 43 in Windows 10

Windows 10 is working fine, and suddenly out of nowhere, it shows up an error message saying that the Windows has stopped this device because it has reported problems (Code 43) on the screen. You might be worrying about the problem occurred in your computer. Well, the error code 43 appears when Windows is not able to recognize the USB device which may signal that problem is occurring because of a bug in the Windows or the Device.

In case you are facing the same error then don’t wait to follow the guide as it is about to troubleshoot the Error Code 43 in Windows 10.

Here, how to troubleshoot error code 43 in Windows 10

Diagnosing the Device Manager

1. Open Control Panel.

2. Go to Device Manager.

3. Now, navigate to the compromised device and right click on it.

4. Choose Uninstall from the drop-down menu.

5. Click Ok and uninstall the device.

6. Now, select and right-click on your computer name from the device list.

7. Select Scan for hardware changes from the menu.

8. It will scan the system and automatically reinstall the device.

9. Again, right-click on the device to select Properties. A box will pop up on the screen.

10. In the General tab in the box, you will see a message saying that the device is working.

Uninstall the Driver update

Sometimes, a driver must have incorrectly installed in the system. In that case, rolling it back could make the device work properly.

1. In the Device Manager, select a device.

2. Now, right click on it to open a drop-down menu.

3. Click Properties and select Driver tab from the popup box.

4. Select Roll Back Driver and click Yes.

System File Checker Scan

A system file checker scan is a full system file scan which detects and repairs the damaged files in the computer. The SFC scan is a workable method to eliminate the error.

1. Open search box in your Windows and type cmd to open Command Prompt.

2. Now, type sfc/ scannow in command and press Enter.

3. Try to rerun the device.

Update your system’s BIOS

Outdated BIOS is unable to process the task which will bring in unsuccessful results by displaying errors on the screen. It becomes very essential to update BIOS in your system which can resolve the error Code 43 in your Windows.

Install Windows updates

Sometimes, a driver is not compatible with the older version of Windows hence the system finds it difficult to recognize the USB device. Installing updates of the Window will let you bring the desired results. With Updates, Windows will receive the files compatible with the USB device.

The methods will work to troubleshoot the error code 43, and you will no longer face the issue while transferring the data with a USB device.

John Morrison is a Microsoft Office expert and has been working in the technical industry since 2002. As a technical expert, John has written technical blogs, manuals, white papers, and reviews for many websites such as www.office.com/setup

How to Create Passwords with iOS

The importance of secure and robust passwords should not be undermined. A strong password not only keeps your phone secure but it also provides essential protection from the identity theft and the financial fraud. The most common ways that hackers break into the computers is by guessing the passwords. Since the iOS11 iPhone has literally saved your password for various accounts of yours and helpfully offers to fill them in for you. With iOS12, you can continue with your password saving ways, but nowhere is good news. iOS 12 can generate strong passwords for your accounts and apps. Usually, when it is left up to the person, they are likely to create from weak to maybe common strength passwords. What does not make the passwords more complex and difficult to crack?

Generate a strong password with iOS 12

When you are creating an account for a website or an app, iOS 12 is going to offer to create a strong password. You merely need to tap into password field while creating an account and iOS is going to provide you with to build a strong password. Tap the blue Use Strong Password button to allow iOS 12 to develop a complexed, long, password for your account. It will now ask if you want to save the password in the iCloud keychain. Tap Save Password, and you will be able to log in to your account without typing, but you will need to use, Touch ID, Face ID or your iPhone’s passcode.

Manage your saved passwords

In order to edit, delete or save passwords, go to Settings>Passwords & Accounts>Website & App Passwords,  log in with your Touch ID, Face ID or the passcode. You will get an alphabetical record of your accounts. Save your device from the misuse of hackers.  Pick a word, preferred language other than English. Remove the letter from it until you have six but the remaining words should be distinguishable for you. Write it T9 style as a passcode. iPhone has letters on passcode keyboard.

John Morrison is a Microsoft Office expert and has been working in the technical industry since 2002. As a technical expert, John has written technical blogs, manuals, white papers, and reviews for many websites such as office.com/setup

Source : office.com/setup

Soui 

How to Reset Microsoft Edge Web Browser in Windows 10

Microsoft Edge is a pre-installed web browser offered in Windows 10. Previously, Microsoft offered Internet Explorer as its pre-installed web browser, but now Microsoft Edge has replaced it in Windows 10. According to Microsoft Corporation, the Edge browser is safer and more compatible than Internet Explorer. The web browser is designed to work efficiently still some of the users are facing the problem while running the internet software. Some claimed that the browser is running slow, taking time open or not even opening.

There could be a few reasons for this inappropriate behavior of Microsoft Edge. But, resetting the browser can be a workaround that you might want to know. Like Internet Explorer, Microsoft Edge cannot be deleted because it is an integral part of Windows. It is true that you can manually uninstall Edge to reinstall it in your computer, but you can perform a reset task to tackle the problem. But remember, resetting the browser may remove all the cached data like history, cookies, and settings. Let’s see the step to check the process to reset Microsoft Edge. However, you must have Windows 10 Fall Creators Update.

Here, the methods to reset Windows Microsoft Edge in Windows 10

1. Close your Microsoft Edge browser.

2. Go to Settings and click Apps.

3. Now, select Apps & features.

4. Scroll down to Microsoft Edge.

5. Click Microsoft Edge and Advanced Options link will appear.

6. Click the link.

7. Now, Storage Usage and App reset page for Edge will open.

8. Click the Reset button, and again the software will ask to click it.

9. Click the Reset button again to confirm.

10. Now, after a few seconds, the software will display a check sign in front of Reset to signify that the process is complete.

Make sure that Microsoft Edge is not running or else the browser might display error. Wait until the process is completed, you can launch the browser again to check whether there is any problem with Microsoft Edge or not.

If there is a problem, then you can Repair the browser through System File Checker.

Since the Microsoft Edge is material in Windows 10, it cannot be deleted. But the problem in Edge can be repaired using the System File Checker tool.

1. Open Command Prompt in your Windows 10 computer.

2. Now type sfc /scannow and press Enter.

3. This command will run your computer on full system scan.

4. After SFC command, restart your computer and check Microsoft Edge is running correctly or not.

Well, SFC commands do work effectively but if it fails, then you must go advanced DISM commands. Note that following any of the processes, you must keep Microsoft Edge closed, else the running web browser might create obstruction resulting in an error in the process. 

John Morrison is a Microsoft Office expert and has been working in the technical industry since 2002. As a technical expert, John has written technical blogs, manuals, white papers, and reviews for many websites such as www.office.com/setup

office.com/setup

Office.com/setup- Learn how to download, install, activate, and uninstall Microsoft Office Setup on different devices and operating systems such as Mac and Windows. Activate your 25 character alphanumeric product key for Office 365, Office 2016, Office 2013, Office 2010, or Office 2007.

office.com/setup | norton.com/setup | office.com/setup

How to Troubleshoot the iPhone Black Screen Issue?

Many of the iPhone users have gone through a problem where their iPhone screen goes black, and then the iPhone screen apparently remains stuck on black.

There can be a variety of different causes of a black iPhone screen, but the good news is that you are likely to find it pretty straightforward to fix a blackout screen. Read this article till the end, and you may have your iPhone screen working as usual again.

The instructions mentioned in this article will show you a variety of potential troubleshooting fixes and possible causes to the concern where your iPhone display stays stuck on a black screen.

Since we found that there are different potential causes to make your iPhone stuck on a black screen, there are also a variety of different possible ways to solve this issue.

Most of the times some software issues cause the black iPhone screen and fortunately, that can easily be fixed. Here we have some of the ways that will help you get your iPhone working again.

Charge the Battery

If the lack of battery power caused the black screen issue, charging your iPhone’s battery can fix this problem. Believe it or not, but your iPhone’s battery may just be empty. However, when the battery is completely drained, you may not be able to see the indicator usually instructs you to charge your battery. I recommend you to try plugging it to the nearest charging point and let it be charging for a while.

Reboot your iPhone

If you think your battery is not the cause of the black screen, or if you don’t find any response even after you have charged it completely, you should try rebooting your iPhone. A soft reset (Reboot) will close all of your open applications and restarts your iPhone. Rebooting your phone can be helpful to you to revive your iPhone that is unresponsive while keeping the data unharmed.

Note: The reboot process may vary depending on the iPhone or its version you are using.

Restore Factory Settings

If you find your iPhone still unresponsive even after exercising two of the methods given above, you probably need to restore the original settings of your device.

Note: The factory reset will erase all of the data and personalized settings from your iPhone. Make sure you back up your device before starting the process. See the instructions below to restore your iPhone:

1. Connect your iPhone to the computer.

2. Open the iTunes.

3. Once the iTunes recognizes your device, find the Summary option and tap it.

4. Then go to the “Restore iPhone” option.

5. The iTunes will then return your iPhone to its original settings. Also, this process will update your iPhone to the latest version of iOS.

Restore or Update your iPhone in Recovery Mode

If you restored the factory settings and still it didn’t work, or iTunes couldn’t detect your iPhone, you are recommended to try forcing your iPhone into the recovery mode. Your device naturally comes into the recovery mode whenever you update to it the latest version of iOS. However, forcing your iPhone into recovery mode can be helpful to repair issue or any damage to your operating system. But make sure you only attempt it when you have a recent backup. See the instructions below to Restore or Update your iPhone in Recovery Mode your iPhone:

1. Connect your iPhone to the computer.

2. Open iTunes.

3. Then reboot your iPhone.

4. Here you will see a popup window, select the Update option from it.

5. Then iTunes will start reinstalling iOS without erasing your data.

Note: If you select the Restore option, iTunes will erase all of your data and personalized settings and restore it to its factory settings.

If you still couldn’t troubleshoot the issue of your iPhone even after trying all of the above steps, then your device must have hardware or software damage. In this case, we recommend you to contact for further assistance in fixing your damage directly.

We hope this article will be helpful to you.

John Morrison is a Microsoft Office expert and has been working in the technical industry since 2002. As a technical expert, John has written technical blogs, manuals, white papers, and reviews for many websites such as www.office.com/setup. 

How to Add Date Time Stamp to Photos when Importing them in Windows 10?

Did you want to Import your all photos to some another device, then don’t worry Windows 10 provides amazing software called as Windows Photo Gallery. No doubt, it’s a very great option with multiple features. So the Windows Photos Gallery will always recommend that used to add date and time also with the picture name or the camera storage device. Usually, the formats are like “YYYYMMDDHHMMSS” or just “YYYY-MM-DD,” as it totally depends on your operating system or the format you choose.

However, when you Windows has updated, then this was automatically removed as a default action since the Windows Photos Gallery was no longer be supported in the Windows 10 operating system. Many of the users are required this option as it makes easy to organize or manage or find any of your files in sequential order.

In this blog, we provide you every information about this feature and how to use it. And the process of How to add date time stamp to name the pictures, while importing them in Windows 10. The steps are discussing below:

Steps to Add Date Time Stamp to Photos when Importing them in Windows 10

To attach the date time and stamp to photos while importing them in Windows 10, you need to follow few simple steps. These steps are easy to understand but you need to follow in sequential order, it will help you in avoiding errors and saves your much time and takes fewer efforts. The steps are mentioning below:

1. Right-click on the desktop screen. Then, select the “New” option. Click on Shortcut option.

2. Now, it will ask for location; then you need to Copy Paste the given line:

· %SystemRoot%\system32\rundll32.exe "%SystemDrive%\Program Files\Windows Photo Viewer\photoAcq.dll",PhotoAndVideoAcquire

3. Alternatively, click on Next tab.

4. Click to add any “Specified Name,” for your Shortcut.

5. Now, import your entire picture with Date, Time. Click on “Save” option.

6. Then, you need to “Connect your Camera.” To Launch the importer, you need to double-click on it. Then, it will auto-detect your cameras, and prompt you to choose it.

7. Then, Select and Import.

Finally, all photos have successfully import on your Windows Photos Gallery on Windows 10.

So, before the actual import, you can just preconfigure all the feature things that are given below:

· You need to add “Tags” to all the photos that you want to import.

· By clicking on the Advanced Options, you can easily configure save location for images, videos, and the folder name has Data and name added. And the file name might include the date, time and also name added together.

Moreover, you have another option i.e, delete all your files directly from the camera, after completing the Importing, you need to open your internet explorer, and then rotate all your pictures on import.

Before importing the images and videos, we suggest seeing the preview of both. After checking the preview of both, you can also hop few imports by unmarking the box given next to the option. However, this software will also provide you the feature to see photos in groups which is in simple words and also grouped by dates. Finally, you can select to import only that new ones to hop all the duplicate file import.

John Morrison is a Microsoft Office expert and has been working in the technical industry since 2002. As a technical expert, John has written technical blogs, manuals, white papers, and reviews for many websites such as office.com/setup. 

Install Printer on Windows PC Without a CD

Did you lose your Printer’s software installation CD? CDs get damaged or lost very easily. If you need to set up your old printer on your new Windows PC, then in most likelihood, you will not be able to find the installation disk. If your computer is connected to the internet, then you can just download the setup from the web. After that, you can use the printer’s USD cord to complete the installation process. Follow the steps given below to add a printer to your Windows device with the help of a USB cord:

1. You can use a USB cable to install a printer. A not so long USB cable is provided with a majority of printers. With this cable, you can connect the printer to the computer directly. Since the cable is not very long, ensure that the printer is positioned in the close proximity of the PC.

2. Now, if you have a Windows laptop, then you will find a USB port for printers along with its sides. If you have a desktop running Windows, then the USB port should be present either in the front side or on the back side of the Central Processing Unit.

3. After inserting the USB cable into the computer’s port, you need to insert the other end into your printer.

4. If the printer does not have a USB cable, then you will have to install the printer manually.

5. After attaching the USB cable, you need to start the printer. Just press the power on the button located on the printer. Wait for a while for the printer to start.

6. In a majority of instances, the installation procedure of the printer begins as soon as it is switched on and connected to a system. If this happens, then just follow the instructions on the screen and install the printer on your computer.

7. If you do not get prompted to initiate the installation procedure after turning on the connected printer, then follow the next step.

8. Click on the Start button. It is located at the lower left edge of the desktop. You can also hit the Windows key on the keyboard.

9. In the Search bar in the Start menu, write: printers and scanner and hit the enter key.

10. Wait for the search for the text as mentioned earlier to be over.

11. In the search results, click on Printers & Scanners.

12. Now, in the upper section in the Printers & Scanners window, click on Add a printer or scanner.

13. In the Add a printer or scanner screen, select the printer.

14. If your printer does not show up in the list, then go to “The printer I want is not listed” and look for it.

15. Now, the installation needs to be initiated. Just follow the directions on the screen. The installation process and time taken for installation depend on the make and model of your printer.

16. When the installation is over, you will be prompted to restart the computer.

17. When the computer restarts, just print a test page to see if the printer is working properly or not.

Edward Cullen is a Microsoft Office expert and has been working in the technical industry since 2002. As a technical expert, Edward has written technical blogs, manuals, white papers, and reviews for many websites such as office.com/setup.